Metrics

Service level in a call centre: the formula, the target and what to do when it drops

The SautiDesk team
11 November 2026 · 8 min read

The short answer

Service level in a call centre is the share of answered calls picked up within a target time, such as 80% within 20 seconds. SautiDesk divides calls answered inside the target by calls answered, leaves out callers who hung up, and lets an admin set the target in Settings. The Service level report on Pro scores every day and queue against it.

Service level is the percentage of answered calls that were picked up within a target time. A team that aims for 80/20 wants 80% of its answered calls picked up within 20 seconds. It is the number a supervisor is asked about most, because it says how long callers waited without anyone having to listen to a single call.

Service level is not an SLA. Service level is a measured result: calls answered within a target. An SLA is a written promise to customers about response and resolution times. A team can have a service level target on its phone queue without a written SLA, and the SLA template covers the written side.

How does SautiDesk calculate service level?

SautiDesk counts the calls that reached a queue, finds how long each answered call waited, and divides the calls answered within the target by the calls answered. The wait runs from the moment the call enters the queue (or arrives, if it never queued) until an agent answers. Callers who hang up before an agent picks up are left out of the formula and counted separately as the abandon rate.

Service level as SautiDesk calculates it, with an example of 200 calls and a target of 80% in 20 seconds
FigureFormulaExample
OfferedInbound calls that reached a queue200
AnsweredOffered calls an agent picked up190
Hung up waiting (abandoned)Offered calls where the caller hung up before an agent answered10
Answered in targetAnswered calls that waited 20 seconds or less152
Service levelAnswered in target ÷ answered × 100152 ÷ 190 = 80.0%
Abandon rateHung up waiting ÷ offered × 10010 ÷ 200 = 5.0%

What counts toward service level and what does not

  • Counted: inbound calls that reached a queue, and each answered leg of a call. A call transferred to a second agent counts once for every agent who answered it.
  • Left out of the service level figure: callers who hung up before an agent answered. They show in Abandon rate and in the Missed and abandoned calls report.
  • Left out of everything in this report: calls dropped in the phone menu, before they reached a queue.
  • Not in this report at all: outbound calls, WhatsApp, SMS, email and web chat. Reply times by channel covers those.

Reading Service level and Missed side by side

The two reports use different lists of calls, so their totals do not match, and that is expected. Service level starts from calls that reached a queue, so a caller who hung up in the phone menu is not in it. The Missed and abandoned calls report counts every inbound call nobody answered, including those menu drops, under "Never reached anyone".

Example: in the 200-call day above, 6 more callers hung up in the menu before reaching a queue. Service level still shows 200 offered and 190 answered. If the 10 hang-ups were the only other unanswered calls, Missed shows 16 under "Never reached anyone": the 10 who hung up waiting and the 6 menu drops. Read Service level for how fast the queue answers, and Missed for every caller who got no one. The missed, abandoned and owed calls guide lists the missed kinds one by one.

The service level threshold an admin sets

The target is a setting, not a fixed rule. An admin opens Settings, then Service level, and fills in five numbers. Reading them needs the Reports access; saving needs the Admin role and a Pro workspace. The reports use the numbers from then on, and because they are worked out when you open a report, a changed target re-scores the dates you look at.

The five Service level settings in SautiDesk, with the limit for each and the default until an admin changes it
Setting on screenWhat it controlsAllowedDefault
Answer at least this share of callsThe target percentage1 to 100%80%
...withinThe target seconds1 to 3,600 seconds20 seconds
Most callers that may hang upThe abandon limit0 to 100%5%
Longest anybody may waitThe longest-wait limit1 to 86,400 seconds120 seconds
Count as a repeat caller withinThe repeat window for first contact and similar figures. It does not change service level1 to 90 days7 days

Three presets fill the boxes for you, and nothing changes until you save. Relaxed is 70% in 30 seconds. Industry standard, tagged "Most teams" in the product, is 80% in 20 seconds and is the default. Strict is 90% in 15 seconds. A team picks its own target: choose one your callers will tolerate and your rota can hold, then tighten it later. The Erlang guide shows what one more agent does to the figure.

The Service level report

Service level sits in the Service group of the reports hub, in SautiDesk Pro. It covers the dates you pick, compares them with the period before by default and filters by queue. Today is partial, because only calls that have happened are counted.

What the Service level report shows
PartWhat it shows
Service levelThe share answered in target, with the target beside it, such as "80% in 20s target"
Days on targetHow many of the days with calls met the target, for example 5 of 7
Abandon rateHung up waiting ÷ offered, red when above your limit
Longest waitThe longest wait among answered calls, red when above your limit
Service level by dayA column per day, red below target, with the target line
By day and By queue tablesService level, Offered, Answered, In target, Hung up, Average wait and a Breach column

A day or a queue is in breach when its service level is under the target percentage, its abandon rate is over the limit, or its longest wait is over the limit. The Breach column says which: "Below target", "Too many hung up" or "Waited too long". Longest wait and Average wait read answered calls only, so a caller who waited ten minutes and then hung up does not raise them. That caller shows in Abandon rate and in Missed.

A second chart, "Calls a day vs service level", plots one dot per day for the last 30 days once five days have calls. It shows whether busy days are the ones that miss. Export CSV downloads the by-day table, and Subscribe emails the report daily, weekly or monthly, so a manager can receive it without logging in.

Queue by hour and Reply times by channel: the two companions

Service level tells you which day failed. Queue by hour, in the floor group, tells you which hour. It lists every hour with calls: Offered, On the floor, Answered, Hung up, Service level, Average wait and Longest wait. The service level cell is green when the hour met the target, amber within 10 points below it and red below that.

Its main chart draws a bar for the calls offered each hour, coloured Met, Close or Missed, with a line for the agents on the floor. Where the bar climbs above the line, service level drops. Filter it by queue to see one team.

Reply times by channel covers what service level leaves out. It reports WhatsApp, email, SMS, web chat and voicemail, with the median first reply, the slowest reply and the messages never answered for each channel. Phone calls are not in it. Together the three reports cover every way a customer can ask for help.

What a supervisor does when service level drops

  1. Find the day or queue. Open Service level and read the Breach column in By day and By queue. A queue that breaches while others hold points to staffing or routing for that queue.
  2. Find the hour. Open Queue by hour for the same dates. Look for the hours that are red where the bar sits above the agents-on-the-floor line.
  3. Separate waiting from hanging up. If Abandon rate is over the limit, open Missed and abandoned calls and look at "How long they held before hanging up" and the "Thin cover" table.
  4. Act on the rota. Move a break, lunch or training session out of the failing hour, or add a person to it. The supervisor morning check uses the same rule: move a break or a shift, not the target.
  5. Size the next change. The How many people report gives the people needed per hour at your target. See how many agents you need.
  6. Check again tomorrow. Open Service level for yesterday and see whether the same hour failed.

Start on SautiDesk

  1. Pick Pro at KES 3,000 per person a month. Service level, Queue by hour and the other reports are Pro; see pricing.
  2. Choose a Kenyan number for KES 500 a month and add your agents and queues.
  3. Give your admin the Reports access, then open Settings, Service level and pick the preset closest to your target.
  4. Take calls for a week, then open Service level and read By day and By queue.
  5. Subscribe to the report so it arrives each morning before the supervisor check.

See every report in the call centre reports guide or on the monitoring and reports page. The phone side is set up in call centre software.

Keep reading

MetricsA customer support SLA template you can copy8 min readMetricsCustomer service KPIs: the 12 numbers worth tracking10 min readTeamThe ten-minute morning check every supervisor should do6 min readTeamHow many agents do you need? The Erlang method in plain language9 min read

Frequently asked questions

Service level in a call centre is the percentage of answered calls that were picked up within a target time, for example 80% within 20 seconds. In SautiDesk it is calls answered inside the target divided by calls answered.

Put calls, WhatsApp, SMS, email and web chat on one screen.

Incoming calls are free. Outgoing calls are KES 0.05 a second, paid from a balance you top up by M-Pesa or card.